{"product_id":"1-channel-long-range-dc-remote-receiver-switch-time-delay-control","title":"1 Channel Long Range DC Remote Receiver Switch Time Delay Control (Model 0020351)","description":"\u003cspan style=\"margin: 0px; padding: 0px; font-family: arial, helvetica, sans-serif; font-size: small;\" size=\"2\" face=\"arial, helvetica, sans-serif\"\u003e \u003cb\u003eFeature:\u003c\/b\u003e\u003cbr\u003e Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.\u003cbr\u003e Wireless control, easy to install.\u003cbr\u003e Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors. \u003cbr\u003e Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminal is NO \/ NC (normally open \/ normally closed), which serves as a switch. That means you should also connect a separate power supply to it.\u003cbr\u003e With wired control terminals: You can connect sensors, limit switches, manual switches or external devices to control the receiver.\u003cbr\u003e With the external antenna, it can have a further working range.\u003cbr\u003e Adjustable delay time: 0 seconds ~ 99 hours\u003cbr\u003e Design with low-power and high-speed CMOS technology.\u003cbr\u003e You can turn on\/ off the receiver with transmitter (remote control) from any place within a reliable distance.\u003cbr\u003e Wireless RF signal can pass through walls, floors, doors or windows.\u003cbr\u003e With reverse power protection and over current protection.\u003cbr\u003e Reliable control: The receiver only works with the transmitter which use same code.\u003cbr\u003e One\/several transmitters can control one\/several receivers simultaneously.\u003cbr\u003e You can use two or more units in the same place.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eReceiver:\u003c\/b\u003e\u003cbr\u003e Model No.: S1DA-DC06-ANT3 \/ S1DA-DC09-ANT3 \/ S1DA-DC12-ANT3 \/ S1DA-DC24-ANT3\u003cbr\u003e Power Supply (Operating Voltage): DC6V (S1DA-DC06-ANT3), DC9V±1V (S1DA-DC09-ANT3), DC12V±1V (S1DA-DC12-ANT3), DC24V±1V (S1DA-DC24-ANT3)\u003cbr\u003e Output: Relay output (Normally open and normally closed)\u003cbr\u003e Working Voltage Range of Relay: AC110~240V or DC0~28V\u003cbr\u003e Transmitting Frequency: 433MHz\u003cbr\u003e Channel: 1 CH\u003cbr\u003e Control Mode: Delay (Press -\u0026gt; ON; Then OFF after the delay time)\u003cbr\u003e Adjustable delay time: 0 seconds ~ 99 hours\u003cbr\u003e Maximum Working Current: 10A \/ each channel\u003cbr\u003e Static Current: ≤6mA\u003cbr\u003e PCB size: 140mm x 73mm x 18mm\u003cbr\u003e Case size: 192mm x 100mm x 45mm\u003cbr\u003e Work with Fixed code transmitters.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eMatching Transmitters:\u003c\/b\u003e\u003cbr\u003e The receiver can work with different transmitters, such as model \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-100m-wireless-remote-control-transmitter-with-cover-model-0021000\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eC-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-button-100m-wireless-remote-control-transmitter-with-cover-model-0021001\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eC-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (100M), \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-50m-wireless-remote-control-transmitter-waterproof-model-0021092\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCWB-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-buttons-50m-wireless-remote-control-transmitter-waterproof-model-0021093\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCWB-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (50M, waterproof), \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-500m-wireless-remote-control-transmitter-model-0021010\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCP-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-buttons-500m-wireless-remote-control-transmitter-model-0021011\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCP-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-button-500m-wireless-remote-control-transmitter-model-0021017\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCV-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (500M), or \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-1000m-wireless-remote-control-transmitter-model-0021023\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCB-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-button-1000m-wireless-remote-control-transmitter-model-0021024\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCB-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (1000M) etc. \u003cbr\u003e \u003cbr\u003e \u003cb\u003eWorking Range:\u003c\/b\u003e\u003cbr\u003e Super long range, with a transmitter (such as CB-2) to form a complete set, the maximum working distance can reach 2000M in an open ground. \u003cbr\u003e The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eExternal telescopic antenna:\u003c\/b\u003e\u003cbr\u003e Length of external telescopic antenna: 108mm \/ 445mm (stretch)\u003cbr\u003e External telescopic antenna use SMA connector.\u003cbr\u003e If you stretches the external telescopic antenna, it can have a further working range.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eUsage (with the transmitter C-2):\u003c\/b\u003e\u003cbr\u003e The receiver can be used to control both DC 0~28V and AC 110~240V equipments.\u003cbr\u003e Notice: The receiver is relay output, not DC\/AC power output. Initial state of relay output terminals: Terminals A and B are Normally Open; Terminals A and C are Normally Closed.\u003cbr\u003e \u003cbr\u003e If you want to control a DC 12V lamp, do as following:\u003cbr\u003e 1) Connect the positive pole of DC power supply to terminal “L \/ +”, and connect the negative pole of DC power supply to terminal “N \/ -”.\u003cbr\u003e 2) Connect terminal C to the positive pole of DC power supply, connect terminal B to the positive pole of DC lamp, and connect the negative pole of DC lamp to the negative pole of DC power supply.\u003cbr\u003e \u003cbr\u003e If you want to control an AC 220V lamp, do as following:\u003cbr\u003e 1) Connect the positive pole of DC power supply to terminal “L \/ +”, and connect the negative pole of DC power supply to terminal “N \/ -”.\u003cbr\u003e 2) Connect terminal C to the live wire of AC power supply, connect terminal B to one side of AC lamp, and connect another side of AC lamp to the neutral wire of AC power supply.\u003cbr\u003e \u003cbr\u003e Press button 1: Turn on relay (connect B and C, disconnect A and B), the lamp is on.\u003cbr\u003e After delay time: Turn off relay by itself (disconnect B and C, connect A and B), the lamp is off.\u003cbr\u003e Press button 2: Turn off relay immediately, no need to wait for delay time.\u003cbr\u003e \u003cbr\u003e Press buttons of “＋” and “－” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second.\u003cbr\u003e For example, if you set “S 0 1”, it means the delay time is 1 second.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eWired control terminals:\u003c\/b\u003e\u003cbr\u003e The receiver has manual control terminals, you can connect external devices, sensors, or manual switches to control the receiver.\u003cbr\u003e 1) Signal input:\u003cbr\u003e You can connect external devices (with low level output signal) to manual terminals “Signal 1-” and “Signal 1+”, then the external device’s output signal can control the receiver.\u003cbr\u003e When the external device outputs low level signal to manual terminal “Signal 1-” and terminal “Signal 1+”, turns on the relay(connect B and C, disconnect A and B) , the lamp is on.\u003cbr\u003e When the external device stops to output signal: Turn off relay (disconnect B and C, connect A and B) , the lamp is off.\u003cbr\u003e \u003cbr\u003e 2) The manual switches:\u003cbr\u003e You can connect manual switch to terminals “Signal 1-” and “Signal 1+”, and then you can use this manual switch to control the receiver.\u003cbr\u003e When connect terminals “Signal 1-” and “Signal 1+”, turns on the relay (connect B and C, disconnect A and B) , the lamp is on.\u003cbr\u003e And when disconnect terminals “Signal 1-” and “Signal 1+”, turns off the relay (disconnect B and C, connect A and B) , the lamp is off.\u003cbr\u003e \u003cbr\u003e \u003cb\u003ePackage Include:\u003c\/b\u003e\u003cbr\u003e 1 x Receiver: S1DA-DC-ANT3\u003cbr\u003e 1 x User manual\u003cbr\u003e \u003c\/span\u003e","brand":"Receivers \/ Wireless Switches","offers":[{"title":"DC 12V","offer_id":40350012014661,"sku":null,"price":70.15,"currency_code":"USD","in_stock":true},{"title":"DC 24V","offer_id":40350012112965,"sku":null,"price":74.75,"currency_code":"USD","in_stock":true},{"title":"DC 09V","offer_id":40350012080197,"sku":null,"price":74.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/1261\/9333\/products\/1_92f06ebe-9751-422d-bbf8-833245bbf6b9.jpg?v=1664514381","url":"https:\/\/www.wireless-remote-switches.com\/products\/1-channel-long-range-dc-remote-receiver-switch-time-delay-control","provider":"Wireless Remote Switches Online Store","version":"1.0","type":"link"}