{"product_id":"1-channel-universal-remote-control-rf-receiver-memory-function","title":"1 Channel Universal Remote Control RF Receiver Memory Function (Model 0020227)","description":"\u003cspan style=\"margin: 0px; padding: 0px; font-family: arial, helvetica, sans-serif; font-size: small;\" size=\"2\" face=\"arial, helvetica, sans-serif\"\u003e \u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.\u003cbr\u003e Wireless control, easy to install.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eFunction of memory:\u003cbr\u003e The power is cut off, and then the power is restored, the relay will return automatically to the previous status.\u003c\/b\u003e\u003cbr\u003e Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminal is NO \/ NC (normally open \/ normally closed), which serves as a switch. That means you should also connect a separate power supply to it.\u003cbr\u003e Each channel can work at maximum current 10A, such as 120W\/12V, 60W\/6V, 90W\/9V, 240W\/24V, 1100W\/110V, 2200W\/220V.\u003cbr\u003e Design with low-power and high-speed CMOS technology.\u003cbr\u003e You can turn on\/ off the receiver with transmitter (remote control) from any place within a reliable distance.\u003cbr\u003e Wireless RF signal can pass through walls, floors, doors or windows.\u003cbr\u003e With reverse power protection and over current protection.\u003cbr\u003e Reliable control: The receiver only works with the transmitter which use same code.\u003cbr\u003e One\/several transmitters can control one\/several receivers simultaneously.\u003cbr\u003e You can use two or more units in the same place.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eReceiver Parameters:\u003c\/b\u003e\u003cbr\u003e Model No. S1MU-DC06 \/ S1MU-DC09 \/ S1MU-DC12 \/ S1MU-DC24\u003cbr\u003e Power Supply (Operating Voltage): DC6V (S1MU-DC06), DC9V±1V (S1MU-DC09), DC12V±1V (S1MU-DC12), DC24V±1V (S1MU-DC24)\u003cbr\u003e Output: Relay output (Normally open and normally closed)\u003cbr\u003e Working Voltage Range of Relay: AC110~240V or DC0~28V\u003cbr\u003e Working Frequency: 433MHz\u003cbr\u003e Channel: 1CH\u003cbr\u003e Control Modes: Self-locking, Interlocking\u003cbr\u003e Static Current: ≤6mA\u003cbr\u003e Maximum Working Current: 10A \/ each channel\u003cbr\u003e PCB size: 67mm x 50mm x 18mm\u003cbr\u003e Case size: 75mm x 54mm x 27mm\u003cbr\u003e Work with Fixed code transmitters or Learning code transmitters.\u003cbr\u003e If you want to have a further working range, you can install an external antenna to the receiver.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eMatching Transmitters:\u003c\/b\u003e\u003cbr\u003e The receiver can work with different transmitters, such as model \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-100m-wireless-remote-control-transmitter-with-cover-model-0021000\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eC-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-button-100m-wireless-remote-control-transmitter-with-cover-model-0021001\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eC-2\u003c\/span\u003e\u003c\/a\u003e \u003c\/span\u003e\u003c\/strong\u003e (100M), \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-50m-wireless-remote-control-transmitter-waterproof-model-0021092\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCWB-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-buttons-50m-wireless-remote-control-transmitter-waterproof-model-0021093\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCWB-2\u003c\/span\u003e\u003c\/a\u003e \u003c\/span\u003e\u003c\/strong\u003e (50M, waterproof), \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-500m-wireless-remote-control-transmitter-model-0021010\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCP-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-buttons-500m-wireless-remote-control-transmitter-model-0021011\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCP-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (500M), or \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/1-button-1000m-wireless-remote-control-transmitter-model-0021023\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCB-1\u003c\/span\u003e\u003c\/a\u003e \u003c\/span\u003e\u003c\/strong\u003e \/ \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e \u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/2-button-1000m-wireless-remote-control-transmitter-model-0021024\" style=\"color: #ff2a00;\" target=\"_blank\"\u003e\u003cspan color=\"FF0000\"\u003eCB-2\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e (1000M) etc.\u003cbr\u003e When you set the receiver in toggle mode, it should work with single button transmitter, such as model C-1 (100M), CWB-1 (50M, waterproof), CP-1 (500M), or CB-1 (1000M) etc. When you set the receiver in latched mode, it should work with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M, waterproof), CP-2 (500M), CV-2 (500M), or CB-2 (1000M) etc.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eWorking Range:\u003c\/b\u003e\u003cbr\u003e With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100M in an open ground.\u003cbr\u003e The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.\u003cbr\u003e If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as CB series transmitters.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eUsage:\u003c\/b\u003e\u003cbr\u003e The receiver can be used to control both DC 0~28V and AC 110~240V equipments.\u003cbr\u003e Notice: The receiver is relay output, not DC\/AC power output. Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals A and B are Normally Closed.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eWiring:\u003c\/b\u003e\u003cbr\u003e If you want to control a DC 12V lamp, do as following:\u003cbr\u003e 1) Connect the positive pole of DC power supply to terminal “+” of INPUT, and connect the negative pole of DC power supply to terminal “-” of INPUT.\u003cbr\u003e 2) Connect terminal C to the positive pole of DC power supply, connect terminal B to the positive pole of DC lamp, and connect the negative pole of DC lamp to the negative pole of DC power supply.\u003cbr\u003e \u003cbr\u003e If you want to control an AC 220V lamp, do as following:\u003cbr\u003e 1) Connect the positive pole of DC power supply to terminal “+” of INPUT, and connect the negative pole of DC power supply to terminal “-” of INPUT.\u003cbr\u003e 2) Connect terminal C to the live wire of AC power supply, connect terminal B to one side of AC lamp, and connect another side of AC lamp to the neutral wire of AC power supply.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eSetting different control modes \u003c\/b\u003e(We have set the receiver as Self-locking control mode before delivery. If you want to use other control modes, do as following operation):\u003cbr\u003e \u003cbr\u003e Setting control mode Self-locking: Only connect Jumper-2.\u003cbr\u003e Control mode Self-locking (with the transmitter C-1): Press -\u0026gt; On; Press again -\u0026gt; Off.\u003cbr\u003e Press button of the transmitter: Turn on the relay (connect B and C, disconnect A and B), the lamp is on.\u003cbr\u003e Press button of the transmitter again: Turn off the relay (disconnect B and C, connect A and B), the lamp is off\u003cbr\u003e \u003cbr\u003e Setting control mode Interlocking: Disconnect Jumper-1 and Jumper-2.\u003cbr\u003e Control mode Interlocking (with the transmitter C-2): Press -\u0026gt; On, other relays Off; Press another button -\u0026gt; Off.\u003cbr\u003e Press button 1: Turn on the relay (connect B and C, disconnect A and B), the lamp is on.\u003cbr\u003e Press button 2: Turn off the relay (disconnect B and C, connect A and B), the lamp is off\u003cbr\u003e \u003cbr\u003e \u003cb\u003eFunction of memory:\u003c\/b\u003e\u003cbr\u003e When the relay is on the status of \"ON\", it will shift to the status of \"OFF\" when the power is cut off.\u003cbr\u003e Once the power is restored, the relay will return automatically to the previous status of \"ON\".\u003cbr\u003e \u003cbr\u003e \u003cb\u003eRelated Links:\u003cbr\u003e \u003c\/b\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"http:\/\/download.carymart.com\/tianxian.pdf\" style=\"color: #2b00ff;\" target=\"_blank\"\u003eAntenna difference\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"http:\/\/download.carymart.com\/yaokong.pdf\" style=\"color: #2b00ff;\" target=\"_blank\"\u003eFixed code remote control\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"http:\/\/download.carymart.com\/yaokong2.pdf\" style=\"color: #2b00ff;\" target=\"_blank\"\u003eLearning code remote control\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cb\u003e\u003cbr\u003e \u003c\/b\u003e \u003c\/span\u003e","brand":"Receivers \/ Wireless Switches","offers":[{"title":"DC 12V","offer_id":40349857415237,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"DC 24V","offer_id":40349857448005,"sku":null,"price":27.6,"currency_code":"USD","in_stock":true},{"title":"DC 06V","offer_id":40349857480773,"sku":null,"price":27.6,"currency_code":"USD","in_stock":true},{"title":"DC 09V","offer_id":40349857513541,"sku":null,"price":27.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/1261\/9333\/products\/1_06_fc2044ff-a588-4f7f-8e5d-44dd5357c456.jpg?v=1670211109","url":"https:\/\/www.wireless-remote-switches.com\/products\/1-channel-universal-remote-control-rf-receiver-memory-function","provider":"Wireless Remote Switches Online Store","version":"1.0","type":"link"}