{"product_id":"100m-ac-110v-220v-power-output-high-power-radio-remote-control-kit-with-waterproof-case","title":"100M AC 110V 220V Power Output High Power Radio Remote Control Kit With Waterproof Case (Model 0020477)","description":"\u003cp\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-family: arial, helvetica, sans-serif;\"\u003e \u003cb\u003ePackage Include:\u003c\/b\u003e\u003cbr\u003e1 x Receiver: S4PX-AC-ANT3\u003cbr\u003e2× Transmitter: C-4\u003cbr\u003e1 x User manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003cbr\u003eThis receiver is an electric device with 4 channels AC power output, it and the transmitter form a wireless remote-control system. This system may be used in all types of industry automation, agriculture, business, home, factory, house, farm, garage, vehicle, ship, aerial vehicle, etc. It can remote control different AC equipment on land, water, and air, such as lights, doors, windows, lamps, sockets, locks, sirens, outlets, heaters, motors, fans, winches, curtains, blinds, linear actuators, electric solenoid valves, and security alarm systems. The applications are endless.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeature:\u003cbr\u003e\u003c\/b\u003eWireless remote control, easy to install.\u003cbr\u003eWaterproof: The receiver has waterproof case and waterproof connector; it can be installed outdoors.\u003cbr\u003eUniversal input: Support 110V AC (110V~120V) used in US, Canada, etc, and 220V AC (220V~240V) used in Germany, UK, France, etc.\u003cbr\u003eAC Power Output: It can control AC equipment with voltage AC 110V, 120V, 220V or 240V.\u003cbr\u003eHigh Power: Each channel can work at maximum load current 30A.\u003cbr\u003eWith external antenna, the receiver has a farther working range.\u003cbr\u003eThe transmitter \/ remote can control the receiver from any place within a reliable working distance.\u003cbr\u003eThe wireless RF signal from the transmitter can pass through walls, floors, doors, or windows, but it will lose some operating range.\u003cbr\u003eThe receiver has reverse voltage protection and overcurrent protection.\u003cbr\u003eThe receiver can only be triggered by paired transmitters.\u003cbr\u003eOne or more transmitters \/ remotes can control one or several receivers simultaneously.\u003cbr\u003eTwo or more receivers may be used in the same area.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReceiver Parameters:\u003cbr\u003e\u003c\/b\u003eModel: S4PX-AC-ANT3\u003cbr\u003eOperating Voltage: 110~240V AC (110V\/120V\/220V\/240V)\u003cbr\u003eWorking Frequency: 433.92 MHz\u003cbr\u003eQuiescent Current: ≤6mA\u003cbr\u003eChannel: 4 CH\u003cbr\u003eOutput Type: 110~240V AC (110V\/120V\/220V\/240V)\u003cbr\u003eMaximum Load Current of Relay: 30A \/ channel\u003cbr\u003eSuitable Wires for Connecting Terminals: 22-12 AWG\u003cbr\u003e8 Different Control Modes: Self-locking, Momentary, Interlocking, and 5 Mixed modes\u003cbr\u003eOperating Temperature: -20 °C ~ +70 °C\u003cbr\u003ePCB size: 170 x 100 x 18 mm (6.7x 4.0 x 0.7 inches)\u003cbr\u003eCase size: 200 x 120 x 53 mm (7.9x 4.0 x 2.0 inches)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTransmitter Parameters:\u003cbr\u003e\u003c\/b\u003eModel: 0021003 (C-4)\u003cbr\u003eChannel\/Button: 4\u003cbr\u003eButton Symbol: 1, 2, 3, 4\u003cbr\u003eOperating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)\u003cbr\u003eOperating Current: 6mA\u003cbr\u003eOperating Frequency: 433Mhz\u003cbr\u003eEncoding Chip: PT2262 \/ PT2264 \/ SC2262\u003cbr\u003eEncoding Type: Fixed code by soldering, up to 6561 codes\u003cbr\u003eTransmitting Distance: 100m \/ 300ft (theoretically)\u003cbr\u003eModulation Mode: ASK\u003cbr\u003eOperating Temperature: -20 ° C to +70 ° C\u003cbr\u003eUnit Size: 58 x 39 x 16 mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMatching Transmitters:\u003cbr\u003e\u003c\/b\u003eThe receiver can work with different transmitters, such as model \u003cb\u003e\u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/4-buttons-50m-wireless-remote-control-transmitter-waterproof-model-0021095\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eCWB-4\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e (50M, waterproof), \u003cb\u003e\u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/4-button-100m-wireless-remote-control-transmitter-with-cover-model-0021003\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eC-4\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e (100 meters \/ 300 feet range), \u003cb\u003e\u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/4-button-500m-wireless-remote-control-transmitter-model-0021018\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e CV-4 \u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e\/ \u003cb\u003e\u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/4-buttons-500m-wireless-remote-control-transmitter-model-0021012\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eCP-4\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e (500 meters \/ 1500 feet range) and \u003cb\u003e\u003ca href=\"https:\/\/www.wireless-remote-switches.com\/products\/4-button-1000m-wireless-remote-control-transmitter-model-0021026\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eCB-4\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e (1000 meters \/ 3000 feet range) etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWorking Range:\u003cbr\u003e\u003c\/b\u003eWith a transmitter (such as C-4) to form a complete set, the maximum working distance can reach 300 feet or 100 meters in an open area.\u003cbr\u003eThe maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no interference. But in the practice, it will be hindered by trees, walls, or other construction, and will be interfered by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.\u003cbr\u003eIf you need a longer working distance, you can replace the antenna on the receiver, or use an RF signal repeater, or use a powerful transmitter, such as a CB-4 transmitter.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUsage:\u003cbr\u003e\u003c\/b\u003eThe receiver can be used to control AC 110~240V (110V\/120V\/220V\/240V) equipments.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWiring:\u003cbr\u003e\u003c\/b\u003eIf you want to control an AC 120V lamp, do as following:\u003cbr\u003e1) Connect the live wire of AC power supply to terminal \u003cb\u003eL\u003c\/b\u003e of INPUT, and connect the neutral wire of AC power supply to terminal \u003cb\u003eN\u003c\/b\u003e of INPUT.\u003cbr\u003e2) Connect the live pole of AC lamp to terminal \u003cb\u003eL\u003c\/b\u003e of OUT, and connect the neutral pole of AC lamp to terminal \u003cb\u003eN\u003c\/b\u003e of OUT.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSetting different control modes:\u003cbr\u003e\u003c\/b\u003eThe receiver will be set in Self-locking mode before leaving the factory, if you want to use another mode, please follow the following steps.\u003cbr\u003e\u003cbr\u003e1) Setting Momentary mode: Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.\u003cbr\u003eThe operation of Momentary mode with the transmitter C-4:\u003cbr\u003ePress and hold the button 1 on the transmitter: The terminal \u003cb\u003eOUT1\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 1 is turned on.\u003cbr\u003eRelease the button 1: The terminal \u003cb\u003eOUT1\u003c\/b\u003e of the receiver stops outputting, and the connected lamp 1 is turned off.\u003cbr\u003e……\u003cbr\u003ePress and hold the button 4 on the transmitter: The terminal \u003cb\u003eOUT4\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 4 is turned on.\u003cbr\u003eRelease the button 4: The terminal \u003cb\u003eOUT4\u003c\/b\u003e of the receiver stops outputting, and the connected lamp 4 is turned off.\u003cbr\u003e\u003cbr\u003e2) Setting Self-locking mode: Press the learning button in the receiver 3 times, signal LED continuously flashes 3 times and then goes off.\u003cbr\u003eThe operation of Self-locking mode with the transmitter C-4:\u003cbr\u003ePress the button 1 on the transmitter: The terminal \u003cb\u003eOUT1\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 1 is turned on.\u003cbr\u003ePress the button 1 again: The terminal \u003cb\u003eOUT1\u003c\/b\u003e of the receiver stops outputting, and the connected lamp 1 is turned off.\u003cbr\u003e……\u003cbr\u003ePress the button 4 on the transmitter: The terminal \u003cb\u003eOUT4\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 4 is turned on.\u003cbr\u003ePress the button 4 again: The terminal \u003cb\u003eOUT4\u003c\/b\u003e of the receiver stops outputting, and the connected lamp 4 is turned off.\u003cbr\u003e\u003cbr\u003e3) Setting Interlocking mode: Press the learning button in the receiver 4 times, signal LED continuously flashes 4 times and then goes off.\u003cbr\u003eThe operation of Interlocking mode with the transmitter C-4:\u003cbr\u003ePress the button 1 on the transmitter: The terminal \u003cb\u003eOUT1\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 1 is turned on. Other 3 terminals stop outputting, and other 3 connected lamps are turned off.\u003cbr\u003e……\u003cbr\u003ePress the button 4 on the transmitter: The terminal \u003cb\u003eOUT4\u003c\/b\u003e of the receiver outputs AC power, and the connected lamp 4 is turned on. Other 3 terminals stop outputting, and other 3 connected lamps are turned off.\u003cbr\u003e\u003cbr\u003e4) Setting Momentary (Channel 1) + Self-locking (Channels 2~4) mode: Press the learning button in the receiver module 5 times, signal LED continuously flashes 5 times and then goes off.\u003cbr\u003e\u003cbr\u003e5) Setting Momentary (Channels 1~3) + Self-locking (Channel 4) mode: Press the learning button in the receiver module 6 times, signal LED continuously flashes 6 times and then goes off.\u003cbr\u003e\u003cbr\u003e6) Setting Momentary (Channels 1~2) + Self-locking (Channel 3~4) mode: Press the learning button in the receiver module 7 times, signal LED continuously flashes 7 times and then goes off.\u003cbr\u003e\u003cbr\u003e7) Setting Momentary (Channels 1~2) + Interlocking (Channel 3~4) mode: Press the learning button in the receiver module 8 times, signal LED continuously flashes 8 times and then goes off.\u003cbr\u003e\u003cbr\u003e8) Setting Self-locking (Channels 1~2) + Interlocking (Channel 3~4) mode: Press the learning button in the receiver module 9 times, signal LED continuously flashes 9 times and then goes off.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to pair the transmitter to the receiver:\u003cbr\u003e\u003c\/b\u003eNotice: We have paired the transmitter to the receiver before leaving the factory.\u003cbr\u003e1) Press the learning button once in the receiver, signal LED on the receiver flashes one time and then stays on, this indicates that the receiver enters the learning status.\u003cbr\u003e2) Press button 1 on transmitter, if the signal LED flashes one time, this indicates that the pairing with button 1 is successful. Then press button 2 on transmitter, if the signal LED flashes one time, this indicates that the pairing with button 2 is successful. Then press button 3 on transmitter, if the signal LED flashes one time, this indicates that the pairing with button 3 is successful. Then press button 4 on transmitter, if the signal LED flashes one time, this indicates that the pairing with button 4 is successful.\u003cbr\u003e3) Press the learning button in the receiver again for 1-2 seconds, signal LED turns off, this indicates that the receiver exits the learning status.\u003cbr\u003e4) The receiver can learn several transmitters with different codes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to delete all transmitters codes stored in the receiver:\u003cbr\u003e\u003c\/b\u003eNotice: We have paired the transmitter to the receiver, if you don’t want the receiver to work with the transmitter, you can delete all transmitters codes stored in the receiver.\u003cbr\u003eOperation: Press the learning button in the receiver 10 times and then release the learning button, signal LED flashes 10 times quickly and then goes off, this indicates that all stored codes have been deleted successfully.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AC Output Wireless Switches","offers":[{"title":"Default Title","offer_id":40332487065669,"sku":"","price":128.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/1261\/9333\/files\/50m-ac-110v-220v-power-output-high-power-radio-remote-control-kit-with-waterproof-case_1.jpg?v=1756971720","url":"https:\/\/www.wireless-remote-switches.com\/products\/100m-ac-110v-220v-power-output-high-power-radio-remote-control-kit-with-waterproof-case","provider":"Wireless Remote Switches Online Store","version":"1.0","type":"link"}