{"product_id":"12-button-transmitter-12-receivers-wireless-vibration-buzzer-paging-kit","title":"12-Button Transmitter \u0026 12 Receivers Wireless Vibration \u0026 Buzzer Paging Kit (Model 0020173)","description":"\u003cp\u003e\u003cspan style=\"margin: 0px; padding: 0px; font-family: arial, helvetica, sans-serif; font-size: small;\" size=\"2\" face=\"arial, helvetica, sans-serif\"\u003e \u003cb\u003ePackage Include:\u003c\/b\u003e\u003cbr\u003e12 x Receiver: Z-06 (Vibration \u0026amp; Beep mode)\u003cbr\u003e1 x Transmitter: CB-12\u003cbr\u003e1 x User manual\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeature:\u003c\/b\u003e\u003cbr\u003eWireless control.\u003cbr\u003eYou can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.\u003cbr\u003eReliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.\u003cbr\u003eOne\/several transmitters can control one\/several receivers simultaneously.\u003cbr\u003eIf you use two or more receivers in the same place, you can set them with different codes.\u003cbr\u003eTransmitting Frequency: 433MHz\u003cbr\u003e\u003cbr\u003e\u003cb\u003eReceiver:\u003c\/b\u003e\u003cbr\u003eModel No.: Z-06\u003cbr\u003e3 Modes: Vibration, Beep, Vibration and Beep\u003cbr\u003eDecode: Learning code\u003cbr\u003ePower Supply: 2 x AAA 1.5V Battery (included)\u003cbr\u003eSize: 77mm x 38mm x 17mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTransmitter:\u003c\/b\u003e\u003cbr\u003eModel No.: CB-12\u003cbr\u003eChannel: 12 CH \u003cbr\u003eRemote Control Distance: 1000m \/ 3000ft (theoretically) \u003cbr\u003eEncode: Fixed code by soldering\u003cbr\u003eUnit size: 135mm x 42mm x 25mm \u003cbr\u003ePower Supply: 1 x 6F22-9V battery (included, can be used for 12 months)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUsage:\u003c\/b\u003e\u003cbr\u003eVibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.\u003cbr\u003eBeep mode: Press the button of transmitter, the receiver beeps for 5 seconds.\u003cbr\u003eVibration \u0026amp; Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.\u003cbr\u003eChanging modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration \u0026amp; beep mode; press the button of transmitter again, switch to vibration mode.\u003cbr\u003eEach button of transmitter can control one receiver.\u003cbr\u003eWe have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all stored codes:\u003cbr\u003eDelete all stored codes: Press and hold the button of the receiver for about 5 seconds until LED light turns on and go on holding till LED light turns off, then release the button, all stored codes have been deleted successfully. At this time, the transmitter cannot control the receiver.\u003cbr\u003eLearning remote controls:\u003cbr\u003e1) Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.\u003cbr\u003e2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.\u003cbr\u003eIf LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.\u003cbr\u003e3) The receiver can learn several remote controls of different codes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: \u003c\/b\u003e\u003cbr\u003eIf you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Wireless Beeper Systems","offers":[{"title":"Default Title","offer_id":40443069792325,"sku":"","price":386.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/1261\/9333\/products\/1_ecd8821b-3891-4113-b5c4-175538246094.jpg?v=1669887525","url":"https:\/\/www.wireless-remote-switches.com\/products\/12-button-transmitter-12-receivers-wireless-vibration-buzzer-paging-kit","provider":"Wireless Remote Switches Online Store","version":"1.0","type":"link"}