Video: wireless remote control AC lamp
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC 100~240V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
Use an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 433MHz
Receiver:
Model No.: S1XC-AC110-ANT2 / S1XC-AC220-ANT2
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): AC100~120V (S1XC-AC110-ANT2), AC200~240V (S1XC-AC220-ANT2)
PCB size: 80mm x 35mm x 14mm
Case size: 100mm x 40mm x 24mm
Maximum Working Current: 3A/each channel
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Usage:
Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
Setting different control modes (We have set the receiver as Self-locking mode before delivery. If you want to use other modes, do as following):
Setting control mode Self-locking: Only connect Jumper-1.
Press button 1, turn on the lamp of receiver 1. Press button 1 again, turn off the lamp of receiver 1.
Press button 2, turn on the lamp of receiver 2. Press button 2 again, turn off the lamp of receiver 2.
Press button 11, turn on the lamp of receiver 11. Press button 11 again, turn off the lamp of receiver 11.
Press button 12, turn on the lamp of receiver 12. Press button 12 again, turn off the lamp of receiver 12.
Setting control mode Momentary: Do not connect Jumper-1 and Jumper-2.
Press and hold button 1, turn on the lamp of receiver 1; Release button 1, turn off the lamp of receiver 1.
Press and hold button 2, turn on the lamp of receiver 2; Release button 2, turn off the lamp of receiver 2.
Press and hold button 11, turn on the lamp of receiver 11; Release button 11, turn off the lamp of receiver 11.
Press and hold button 12, turn on the lamp of receiver 12; Release button 12, turn off the lamp of receiver 12.
Setting control mode Interlocking: Only connect Jumper-2.
Press button 1, turn on the lamp of receiver 1, turn off the lamp of receiver 2,3,4,5,6,7,8,9,10,11,12.
Press button 2, turn on the lamp of receiver 2, turn off the lamp of receiver 1,3,4,5,6,7,8,9,10,11,12.
Press button 11, turn on the lamp of receiver 11, turn off the lamp of receiver 1,2,3,4,5,6,7,8,9,10,12.
Press button 12, turn on the lamp of receiver 12, turn off the lamp of receiver 1,2,3,4,5,6,7,8,9,10,11.
Package Include:
1 x Receiver: S1XC-AC110-ANT2 / S1XC-AC220-ANT2 (1 Channel / Three Control Modes)
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC 100~240V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
Use an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 433MHz
Receiver:
Model No.: S1XC-AC110-ANT2 / S1XC-AC220-ANT2
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): AC100~120V (S1XC-AC110-ANT2), AC200~240V (S1XC-AC220-ANT2)
PCB size: 80mm x 35mm x 14mm
Case size: 100mm x 40mm x 24mm
Maximum Working Current: 3A/each channel
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Usage:
Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
Setting different control modes (We have set the receiver as Self-locking mode before delivery. If you want to use other modes, do as following):
Setting control mode Self-locking: Only connect Jumper-1.
Press button 1, turn on the lamp of receiver 1. Press button 1 again, turn off the lamp of receiver 1.
Press button 2, turn on the lamp of receiver 2. Press button 2 again, turn off the lamp of receiver 2.
Press button 11, turn on the lamp of receiver 11. Press button 11 again, turn off the lamp of receiver 11.
Press button 12, turn on the lamp of receiver 12. Press button 12 again, turn off the lamp of receiver 12.
Setting control mode Momentary: Do not connect Jumper-1 and Jumper-2.
Press and hold button 1, turn on the lamp of receiver 1; Release button 1, turn off the lamp of receiver 1.
Press and hold button 2, turn on the lamp of receiver 2; Release button 2, turn off the lamp of receiver 2.
Press and hold button 11, turn on the lamp of receiver 11; Release button 11, turn off the lamp of receiver 11.
Press and hold button 12, turn on the lamp of receiver 12; Release button 12, turn off the lamp of receiver 12.
Setting control mode Interlocking: Only connect Jumper-2.
Press button 1, turn on the lamp of receiver 1, turn off the lamp of receiver 2,3,4,5,6,7,8,9,10,11,12.
Press button 2, turn on the lamp of receiver 2, turn off the lamp of receiver 1,3,4,5,6,7,8,9,10,11,12.
Press button 11, turn on the lamp of receiver 11, turn off the lamp of receiver 1,2,3,4,5,6,7,8,9,10,12.
Press button 12, turn on the lamp of receiver 12, turn off the lamp of receiver 1,2,3,4,5,6,7,8,9,10,11.
Package Include:
1 x Receiver: S1XC-AC110-ANT2 / S1XC-AC220-ANT2 (1 Channel / Three Control Modes)
1 x User manual