Package Include:
1 x Receiver: S1T-AC110 / S1T-AC220
1 x User manual
Application:
This RF wireless receiver can be used for remote control of lights, motors, fans, electrically operated doors, locks, windows, blinds, cars or other appliances.
Feature:
Wireless control, easy to install.
Universal input: Support 110V AC (110V~120V) used in US, Canada, etc, and 220V AC (220V~240V) used in Germany, UK, France, etc.
The transmitter / remote can control the receiver from any place within a reliable working distance.
Wireless RF signal from the transmitter can pass through walls, floors, doors, or windows, but it will lose some operating range.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One or more transmitters / remotes can control one or several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Receiver Parameters:
Model: S1T-AC110 / S1T-AC220
Power Supply (Operating Voltage): AC100~120V (S1T-AC110), AC200~240V (S1T-AC220)
Working Frequency: 433 MHz
Static Current: ≤6mA
Channel: 1 CH
Maximum Working Current of Relay: 3A / each channel
Control Modes: Self-locking (Press -> On; Press again -> Off)
PCB size: 80 x 35 x 14 mm
Case size: 100 x 40 x 24 mm
Matching Transmitters:
This receiver can work with different transmitters, such as model C-1 (100M), CWB-1 (50M, waterproof), CP-1 (500M), or CB-1 (1000M).
Working Range:
The receiver and the transmitter(such as C-1) form a wireless remote control switch, the maximum working distance may reach 100 meters in an open area.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no interference. But in the practice, it will be hindered by trees, walls or other construction, and will be interfered by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.
If you need a longer working distance, you can replace the antenna on the receiver, or use an RF signal repeater, or use a powerful transmitter, such as a CB-1 transmitter.
Usage:
Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
Press the button on the transmitter: The relay in the receiver is activated, and the connected lamp is turned on.
Press the button again: The relay is deactivated, and the connected lamp is turned off.