Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
With characteristics of reverse power protection and over current protection
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 433MHz
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)
Receiver:
Model No: S1XB-DC06-ANT2 / S1XB-DC09-ANT2 / S1XB-DC12-ANT2 / S1XB-DC24-ANT2
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1XB-DC06-ANT2), DC12V±1V (S1XB-DC12-ANT2), DC9V±1V (S1XB-DC09-ANT2), DC24V±1V (S1XB-DC24-ANT2)
Output: DC6V (S1XB-DC06-ANT2), DC12V (S1XB-DC12-ANT2), DC9V (S1XB-DC09-ANT2), DC24V (S1XB-DC24-ANT2)
PCB Size: 67mm x 50mm x 18mm
Case Size: 75mm x 54mm x 27mm
Static Current: ≤6mA
Maximum Working Current: 10A
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Transmitter:
Model No.: CB-12
Channel: 12 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
1) Setting control mode Self-locking: Only connect Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press button 1 again: Turn off the relay, terminal A&B of receiver 1 no output.
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press button 12 again: Turn off the relay, terminal A&B of receiver 12 no output.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Release button 1: Turn off the relay, terminal A&B of receiver 1 no output.
Press and hold button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Release button 12: Turn off the relay, terminal A&B of receiver 12 no output.
3) Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 1 no output.
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 12 no output.
Package Include:
12 x Receiver: S1XB-DC-ANT2
1 x Transmitter: CB-12
1 x User manual
Note:
The distance of 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it may be hindered by trees, walls or other constructions, and may be exposed to some interference by other signals. Therefore, the actual distance can not reach 2000m. It depends on the actual working environment.
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
With characteristics of reverse power protection and over current protection
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 433MHz
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)
Receiver:
Model No: S1XB-DC06-ANT2 / S1XB-DC09-ANT2 / S1XB-DC12-ANT2 / S1XB-DC24-ANT2
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1XB-DC06-ANT2), DC12V±1V (S1XB-DC12-ANT2), DC9V±1V (S1XB-DC09-ANT2), DC24V±1V (S1XB-DC24-ANT2)
Output: DC6V (S1XB-DC06-ANT2), DC12V (S1XB-DC12-ANT2), DC9V (S1XB-DC09-ANT2), DC24V (S1XB-DC24-ANT2)
PCB Size: 67mm x 50mm x 18mm
Case Size: 75mm x 54mm x 27mm
Static Current: ≤6mA
Maximum Working Current: 10A
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Transmitter:
Model No.: CB-12
Channel: 12 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
1) Setting control mode Self-locking: Only connect Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press button 1 again: Turn off the relay, terminal A&B of receiver 1 no output.
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press button 12 again: Turn off the relay, terminal A&B of receiver 12 no output.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Release button 1: Turn off the relay, terminal A&B of receiver 1 no output.
Press and hold button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Release button 12: Turn off the relay, terminal A&B of receiver 12 no output.
3) Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay, terminal A&B of receiver 1 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 1 no output.
Press button 12: Turn on the relay, terminal A&B of receiver 12 outputs DC power.
Press other buttons: Turn off the relay, terminal A&B of receiver 12 no output.
Package Include:
12 x Receiver: S1XB-DC-ANT2
1 x Transmitter: CB-12
1 x User manual
Note:
The distance of 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it may be hindered by trees, walls or other constructions, and may be exposed to some interference by other signals. Therefore, the actual distance can not reach 2000m. It depends on the actual working environment.